Wide range of Optical Fiber Cable (OFC)
UNI TUBE SINGLE JACKET FIBER OPTIC CABLE
Our Uni-tube single jacket Un-Armoured and Armoured Fiber Cables cater for diversified needs of CATV operators and Internet Service Providers. These cables can be used for aerial installation as well as installation in Ducts/Conduit. This cable consist of Jelly Filled Central Loose Tube made up of PBT, strengthened with Embedded Strength members and jacketed with HDPE. Different variants offered are
FIBRE COUNT: 2 TO 24
EMBEDDED STRENGTH MEMBER: FRP OR STEEL WIRE
OPTIONAL PERIPHERAL MEMBER: GLASS YARNS OR ARAMID YARNS
Multi Tube Optical Fibre Cable
We offers wide range of Multi Tube Single & Double Jacket un-armoured and armoured fiber cables suited for the different sectors including Telecom, Power plant, Solar Plant, Oil and Gas, Real Estate, Metro Rails, Smart City projects etc. These cables possess excellent Crush Resistance and can be used for Direct Burial applications as well as installation in Ducts. This cable consist of Non-metallic Central Strength Member and Jelly Filled Loose Tubes made up of PBT stranded over the Central Strength member. Loose tube consists of required no. of Optical Fibres. Prevention from water and moisture ingress is provided either by WS Tape and WS yarns or by Flooding Gel. This cable has two jackets. Inner sheath is of MDPE or HDPE and Glass Roving Yarns are applied as peripheral strength members over the inner sheath. Outer sheath is done with HDPE over the Glass yarns. Rip Cords are provided under inner sheath as well as outer sheath for easy ripping. Different variants offered are:
FIBRE COUNT: 4 TO 288
CENTRAL MEMBER: FRP OR STEEL WIRE
CORE TYPE: DRY CORE (WITH WS YARNS AND WS TAPE) OR WET CORE (WITH FLOODING GEL)
INNER JACKET TYPE: MDPE OR HDPE
OUTER JACKET TYPE: HDPE OR LSZH
Single & Multi Tube ADSS Optical Fibre Cable
We specializes in design of Single & Multi Tube Single and Double Jacket ADSS cables which are suitable for Aerial installation of medium and large spans (Typically 150mtr to 600mtr span). These cables are completely metal free so that these can be installed on Utility Electricity poles ensuring no interference due to electromagnetic field in the vicinity. These cables are light in weight which facilitates easy installation over the poles. This cable consist of Non-metallic Central Strength Member which is surrounded by Jelly Filled Loose Tubes made up of PBT. Loose tube consists of required no. of Optical Fibres. Prevention from water and moisture ingress is provided by WS Tape. This cable consist of two jackets, Aramid Yarns are applied over inner sheath as peripheral strength members which are light in weight and possess extremely good tensile strength. Outer sheath is done with HDPE. Rip Cords are provided for easy ripping of inner and outer sheath. Different variants offered are:
FIBRE COUNT: 6 TO 288
SPAN: UP TO 600 MTRS UNDER DIFFERENT NESC LOADING CONDITIONS
OPGW CABLE WITH CENTRAL CORE ALUMINUM SHEATHED TUBE
SINGLE LAYER CONSTRUCTION
In composite conductors a fiber cable unit containing the Optical fibers is either integrated or embedded into a conductor or ground wire. In voltages below 138-kV the composite conductor can also be a phase wire. However, usually the fiber unit containing the Optical fibers is placed inside the ground wire. OPGW can be a light weight ground wire designed to be used as a static wire replacement or it can be installed in addition to conventional ground wire. Currently, the number of Optical fibers that can be readily fitted into an OPGW aerial wire construction can reach up to 144 fibers. The metallic wires have to give the OPGW aerial cable enough conductivity to carry fault currents, and the strength to withstand mechanical stresses.
OPGW CABLE WITH STAINLESS STEEL TUBE AND ALUMINUM CLAD STEEL TUBE
OPGW cable with stainless Steel and aluminum clad steel tube is available in fiber counts up to 48. The cable can be designed into single or dual layered construction in accordance to the mechanical and electrical requirements as per application needs of the end-user.
Due to its unique small size this becomes the perfect solution for overloaded towers with its small diameter and light weight construction. The fibers are protected from environmental conditions to ensure reliability and long life.
HIGH STRENGTH OPGW CABLE
High strength OPGW cable is available up to 96 fibers making it suitable for application is high fiber count and super-high-voltage power lines. Steel tubes are stranded with Hi-strain steel wires to create a dual-layer design suitable for a range of high strength applications. The layer of Aluminum gives this product a high fault rating current values.
Single and Multi Mode Optical Fiber
ITU-T G652B
They are the most common single mode fibre in the world. It is tuned to minimize the dispersion around the wavelength at 1310nm. 1550nm wavelength can be used for shorter distance or with dispersion compensating fibre.
ITU-T G652D (LOW WATER PEAK SINGLE MODE FIBRE)
This single mode fibre has low water peak, characterized by the attenuation at 1383nm being less than the attenuation at 1310nm. Due to Its low water peak characteristics and excellent stability performance against hydrogen, it is suitable for entire wavelength range from 1260nm to 1625 nm.
This fibre is fully compliant with ITU-T 652D.
ITU-T G655 (NON-ZERO DISPERSION SHIFTED FIBRE)
This is wide band transport fibre which has positive or negative dispersion intensity. The reason for that is to reduce the non-linear phenomenon which interferes with the adjacent wavelength in DWDM system.
ITU-T G657 (LOW BEND FIBRE)
It is a single mode fibre with low bend sensitivity across the overall bandwidth (1260-1625). It offers optimized bend performance for Fibre to the Home (FTTH), enterprise networks, or any application where small bend diameters may be encountered. It is fully compliant to the new ITU-T G657
62.5/125 (OM1) & 50/125 (OM2/ OM3)
Transmission speeds/distances limits are 100 Mbit/s up to 2 km, 1 Gbit/s for distances up to 500-600meters, and 10Gbit/s for distances up to 300 meters. These are widely deployed in premises application & easily support applications ranging from Ethernet (10 Mbit/s) to Gigabit Ethernet (1 Gbit/s) and, because of their relatively large core size, are ideal for use with LED transmitters. They support more than one propagation mode, hence it is limited by modal dispersion.
FRP Rods
Di-electric cable composite strength member widely known as FRP/GRP rod is designed to provide excellent strength performance while maintaining high degree of stiffness, preventing cable buckling over its entire service life.
Light weight and excellent tensile strength
Prevents cable buckling
Most suited for multi-loose tube, uni-tube, slotted core and ribbon cable designs
Used as central or peripheral reinforcement in fibre optic cable
Dual Advantage: Reinforcement during installation as well as reduce stress on signal carrying optic fibre/conductor
Prevent sagging in aerial installation
Cost effective solution as a strength member
Product Range
We provide a wide array of sizes as per customer specifications with diameter ranging from 0.4mm to 6.5mm
Options Available:
FRP is available in various coatings including EAA (Ethylene Acrylic Acid) and HDPE, which allows easy handling and better grip to the cables.
OFC Accessories
Optical Fiber Joint Enclosure
Best for all type of Ribbon and Non-Ribbon type of OFC splacing
Optical Fiber Termination & Distribution Box
Suitable for Splicing, Termination & Distribution upto 24F. Wall & Pole Mountable.
Optical Fiber Distribution Management Box
Suitable for Splicing up to 144 F and 19″ rack mounting.
OPGW Joint Enclosure
Suitable for single mode and multi mode Fiber type. It is suitable for Pole mounting, underground burial & man hole.
Fiber Optical Patch Cords / Pigtail
Available in different type of connectors such as SC, FC, LC, ST, MTRJ, DIN, SMA, E2000, Hybrid in PC/APC combinations.
Fiber Optic Fusion Splicer
Store 8000 groups of splice results USB & DC interface High battery capacity, up to 200 times of continuous splice and heat
Optical Fiber Spitter Box
Available in 1:16, 1:32, 1:64 variants. Loaded with ABS body type splitter and adaptors. Specially designed for FTTH solution.
Fiber Patch Panel
Suitable for Splicing up to 96F. Can be wall mounted or rack mounted. 100% Rust proof, Power Quoted Metalic Body.