Complete range of SS Wires, Copper Wire, Insulated Cable
EHV CABLE
Construction: Single Core Copper or Aluminum/Semicon/XLPE Insulated/Semicon/ Water Swellable Tape/ Lead or Corrugated Aluminum Sheathed or Laminated Aluminum or Unarmoured PVC/ Polythene Sheathed.
Voltage Grade: 66/110/132/220/500KV
Size: Up to 1200 sq mm Copper / Aluminum
Referred Standards: IEC 60840 / IS 7098 Part 3 / IEC 62067
LT & HT CABLE
We provide all types of LT & HT Cables based on your requirements. Out product ranges are 0.6kv, 1.1kv, 3.3kv, 6.6kv, 11kv and 33kv. Available in Single and Multi cores (3 Cores / 4 Cores).
Suitable for installations indoors: mostly in power supply stations and outdoor: in cable ducts, underground and on cable trays for industries, switch boards and power stations.
Specifications: Stranded circular compacted Aluminum / Copper (plain annealed) conductor (Class 2), Water tight conductors. Extruded layer of a cross linkable semi-conducting compound as a stress control layer. Extruded layer of cross linked polyethylene (XLPE). Combination of Copper Wire & Flat plain copper tape opex helix applied over the insulations. Non hydroscopic PVC filler suitable for cable operating tempreture. Additional characteristic FR, FRLS, LSOH, ZHFR. Armoring with GI formed wire (strip) / round wire. GI Tape single / double layer. Outer jacket of Polyvinyl chloride (PVC) with FR, FRLS, LSOH, ZHFR. Polyethylene (PE) HDPE, MDPE.
MV/HV CABLE
Construction: 1 & 3 Core: Al/Bare Cu, Semicon/PVC or XLPE Insulated/Semicon/ Water Swellable Tape/ Armoured/Unarmoured, HR PVC/ LSZH / FRI-S / FR / HDPE Inner & Outer Sheath.
Voltage Grade: 3.8/6.6 W, 6.35/11 W (E), 11/11 W (UE), 12.7/22 W (E), 19/33 W (E), 33/33 W (UE)
Size: 25 sq mm to 1000 sq mm for Single core & 400 sq mm for 3 core
Referred Standards: IS: 1554-P2, IS 7098-2, IS 7098-3IEC:60502-2, BS:6622, & RELEVANT NFC
AERIAL BUNCHED CABLE
Construction: HD AL/ AL Alloy / Cu, XLPE / PVC / PE Insulated, Messenger/ Insulation specially formulated for exposure to sunlight and Outdoor Application, MV Cables XLPE Insulated & Screened, Cores are PVC Sheathed.
Voltage Grade: 1kV to 33kV
Size: 16 Sq mm to 400 Sq mm
Referred Standards: IS 14255, BS:7870-5, BS:625, HD:626, VDE:00276, PART 626, IEC : 60502-1&2, NFC:33-209, BS:6485, IS:398 PART-4, 197098 PART-I, IS: 1554 P-1
LV POWER & CONTROL CABLE
Construction: Al/Bare Cu/Tinned Cu, PVC/XLPE/HR PVC Insulated, Armoured/Unarmoured, LSZH /FRLS/FR/PVC/HR PVC/HDPE Inner & Outer Sheath.
Voltage Grade: 1kV to 3.3kV for Power & up to 1100 V for Control Cable
Size: (Power) 1C, 2C, 3C, 4C,- 4 sq mm to 1000 sq mm, 3.5C – 25 sq mm to 400 sq mm or as per client’s requirement. (Control) 1.5sq mm – 2Cto 100 Cores & 2.5sq mm – 2C to 100 Cores or as per client’s requirement.
Referred Standards: IS: 1554 (P-1), IS: 7098 (P-1), IEC: 60502 (P-1), BS: 5467, BS: 6724, BS: 6346, BS: 7889
RAILWAY CABLE
Axle Counter Ouad Cable, Indoor/ Outdoor Signalling Cable, PIJF Telecom Cable, Power Cable, Grooved Contact Wire, Catenary Wire
Size: Quad Cable, Control cable upto 100 core & up to 4C x 630 sq.mm
5 Pairs upto 200 pairs and size 0.5 mm/ 0.63 mm/0.9mm
107 sq.mm and above up to 193 sq.mm, Up to 37 strands
Referred Standards: IRS TC 30/05, RDSO/SPN/TC/72/07, IRS S 63/2014, IRS S 76/89
IRS TC 41/97, IRS S 63/2014, IS: 1554(Part 1), IS: 7098 (Part 1), ETI/OHE/76(6/97), ETI/ OHE/50(6/97
THERMOCOUPLE CABLE
Construction: KX, JX, EX, TX, Type Extension / KX, SX, RX Type Compensating Conductor, XLPE/PVC PTFE/LSOH/LDPE Insulated, Armoured/Uarmoured, PVC/HR PVC/LSZH/HDPE Inner & Outer Sheath, Individual Screened/Overall Screened – Al Mylar/Cu Tape /Braiding – ATC Wire/G.l. Wire/ Pb Braid.
Voltage Grade: 300 / 500 / 1100 Volts
Size: 12 AWG / 16 AWG / 20 AWG – up to 200 pairs and as per client’s requirement
Referred Standards: EIL SPEC: 6-52-46, ANSI: MC-96.1, ENI-163.00, 1S: 8784, BS:7655
INSTRUMENTATION/ SIGNAL / FIRE ALARM / BRAIDED CABLE
Construction: Bare /Tinned Cu, PVC/XLPE/HR PVC/LSZH/EVA/LDPE Insulated. LSZH/PVC/HR PVC/HDPE/EVA/FRLS Inner & Outer Sheath, Aroured/Unarmoured, Individual Screened/ Overall Screened – Al Mylar/Cu Tape /Braiding – ATC Wire/G.I. Wire/ Pb Braid.
Voltage Grade: 300 / 500 / 1100 Volts
Size: 1P to 200P – up to 4 sq mm, 1T/Q to 200T/Q – up to 4 sq mm and as per client’s requirements
Referred Standards: IEC 60189, VDE 0207, EIL-6-52-46, EIL – 6-51-52, BS:5308 Part 1 & 2,BSC 143-0.75 (24/0.2 mm) OAS, IEC 60092-375, 376, BS EN 50288 PART-7, VDE 0815, VG 95218, NEK 606 OR as per customer’s specifications.
FIRE SURVIVAL / LSZH CABLES
Construction: Al / Bare Cu/ Tinned Cu, Heat Barrier Glass Mica Tape, EPR/LSZH/SILICON/EVA/ XLPE
Insulated, Wire/Flat/Braid/Copper Tape/G.S./CU/AL/PB/SS/ATC Braid, PVC/HR PVC/LSZH /FRLS/FR/
CSP/EVA/PCP Inner & Outer Sheath..
Voltage Grade: Up to 1100 Volts
Size: Fire Alarm Power Cables : 1 core to 5 core- up to 1000 sq mm
Fire Alarm Control Cables: up to 61 cores – 0.5 sq mm to 4sq mm Fire
Alarm Signal Cables: up to 200 pairs/triads – 0.5 sq mm to 4 sq mm
Referred Standards: 1S:1554 (P-1), 1S:9968, BS:5467, VDE-0207, BS:6346, IEC:60331, BS:5746, IEC:60502-1, BS:7846, BSEN-60811 & II, IEC:60092, NEK-606, BS:6883, BS: 6387
RUBBER CABLE (ELASTOMERIC)/ TRAILING CABLES / COMPOSITE CABLES
Construction: Bare Cu/Tinned Cu, VIR/EPR/CSP/SILICON/EVA/BUTYYL/SBR Insulated TRS/ PCP/CSP/NBR PVC/EVA Inner & Outer Sheathed.
Voltage Grade: 1.1 kV to 11 kV
Size: 1C, 2C, 3C, 4C,- 0.5 sq mm to 630 sq mm 3.5C— 25 sq mm to 400 sq mm and as per client’s requirement
Referred Standards: 1S:9968 (P-1 & 2), 1S:14494, IEC-60502-1 & 2, IEC:60092-350, VDE:250, BS:6007, BS:7919, BS:6195, NCB:118, NES & DEFSTAN, RDSO Specification, NEK-606, BS:6883
BARE CONDUCTORS FOR OVERHEAD POWER TRANSMISSION & DISTRIBUTION LINES
Construction: AAC, ACSR, AAAC
Voltage Grade: 11 kV to 800 kV
Size: 25 sq mm to 1600 sq mm and as per client’s requirement
Referred Standards: IS 398, BSEN 50182, ASTM B232
FLEXIBLE & BUILDING WIRES
Construction: Bare/Tinned Cu, PVC/HR PVC/FRLS/FR/LSZH/EI-5 Insulated, PVC/HR PVC/LSZH Sheath (for Multi Core).
Voltage Grade: 300 / 600 / 1100 Volts
Size: House Wire – 0.5 sq mm to 6 sq mm, Multi Core – 2C to 24C – 0.5 sq mm to 400 sg mm
Single Core Flexible – 0.5 sq mm to 1000 sq mm, Building Cables – 0.5 sq mm to 6 sq mm and as per client’s requirement
Referred Standards: IS:694, BS:6004, BS:6500, BS:7211, IEC-60227-1, 2,5 CSA-22.2 No.38-05
MULTISTANDARD / HOUSE WIRE
PVC Insulated wires of various sizes are available with us for residential and commercial building power and electricity distribution. The copper conductor used in electrolytic grade bright soft annealed to save substantial electricity cost. The PVC compound installation is of high electrical value resulting in high resistance & dielectric strength of the cable.
FR / FRLS Calbes
Our Multistandard / House wires also comes in FR / FRLS grade of special PVC compound to give excellent fire resistance properties. Because of High Oxygen Index of our fire Defence Wire, the burning is quite slow. Also because of excellent Smoke Density Features, it emits very less smoke / HCL enabling easy passage. They are highly recommended for use in Multy Storyed Buildings.
SUBMERSIBLE 3 CORE FLAT CABLE
We povide 3 core Flat / Round Cable for submersible pumps with bright annealed electrolytic grade flexible copper conductors.
Special PVC compund with high resistance values used for this cable makes the cable resistant against water, oil, petrol, most acids, alkalines and grease in additiion to the smooth and excellent finish. This cable is suitable for parameter 1100V grade applications.
SHIELDED / UNSHIELDED CABLE
Multi Core screened (Shielded / braided) flexible cables used for low noise signal cables and control purposes. These cables are generally confirming to IS:694 (1990) BS-5308 and are manufacuted with flexible copper conductors, PVC insulation, Tinned copper braided / shielded with overall PVC sheath. These cables are espacially developped for Defence, Telecommunications and Electronic Applications. Very feeble signals can be transmitted with least interference.
MULTICORE FLEXIBLE COPPER CABLE
PVC insulated / sheathed multicore cables with flexible conductors are manufactured with most stringeent quality control to ensure total safety, prevention of shock hezards, less possibility of fires and complete assurance for a perfect system. E.C. grade copper and dielectric grade virgin specially compounded PVC make these wires ideal for any Industrial / Equipment / Appliances application.
These cables are used for indoor movable installation in dry locations, connecting to source power portable electrical appliances operating under un-favourable conditions. These cables can also be used for DC voltages up to 1500 volts.
CO-AXIAL CABLE
Solid Copper center conductor, dielectric of foam PE, Alu Foil Shielded, Base Copper / Aluminium Alloy braiding 95% coverage and overall PVC sheathed, mainly used for Transmission of RF signal. These are very reliable, convenient and also have easily maintained of transferring images in CCTV systems.
Co-Axial Cable is used as a transmission line for digital video signal, in applications such as connecting Radio transmitters and receivers with their antennas, computer network (internet) connections and distributing cable television signals. (RG – 11), (RG-6), (RG-59)
CCTV CAMERA CABLE
Multi-core construction of 75 ohms Co-Axial cables for video signal (crystal clear picture quality), flexible wire cores for audio signal and for supplying (12 Volt) Power used for CCTV (Closed Circuit Television) Camera & Surveillance systems.
We can design te CCTV Cable as per your required specifications.
3+1, 4+1, 5+1, 6+1
NETWORKING / DATA / LAN CABLE
Solid Copper Conduct used in this cables as per specification. These cables are twisted pair cables for carrying signals. Network cables are used to connect and transfer data and information between computers, routers, switches, cameras and storage area network.
These cables are manufactured in various types as mentioned below:
CAT-5, CAT-6, UTP, STP, FTP, SFTP.
BARE COPPER WIRE
Bare Copper Wire refers to a single strand of copper wire that does not have an extra coating. These wires are used in electrical industries and can be used as a single wire in ground conductors, hook-up wiring and jumper cables.
These wiires are also used in multi-stand solid and standed copper conductors. It can be hard, medium-hard or soft annealed, depending on its properties. Bare copper has plausible corrosion resistance and high temperature resistance properties.
Material: Copper
Type: Bare
Purity: 99.9%
Diameter range: 0.7 MM to 8.0 MM
ANNEALED BARE & FINE COPPER WIRE
Annealed Bare Copper Wire: With the use of latest technology offline and online annealer of copper wires are annealed which ensures uniform and high level annealing of drawn copper wires.
Diameter range: 0.4MM to 3.0MM
Fine Copper Wire: Super fine copper wire an additional use of offline annealer these wire ansures to all the high quality standards.
Diameter range: 0.1MM to 0.4MM
BUNCHED COPPER WIRE
We are predominantly catering to the industrial requirements and with the use of latest technology Bunchers, Bunched Copper Wires are manufactured with high quality and performance standards.
Bunched copper wires provide flexibility. Copper in bunched wire form is extensively exploited in areas of where motion is explicitly required. It is a metal filled with paradoxes as it is soft yet ductile and strong.
Diameter range: 0.5 Sqmm to 10 Sqmm
STAINLESS STEEL WIRE
We offer High Quality Stainless Steel Wire for various applications. Our wire have Smooth Surface, High Corrosion Resistant, High Fatigue Strenght, Excellent Heat Resistance and free from lateral / longitudinal cracks, pits & marks etc.
Grade: 304, 304L, 303, 304CU, 201, 202, 204CU, 302HQ, 302, 304HC, ER308L, ER309L, 316, 316L, ER316L, 410, 430 Etc.
Diameter: 0.10mm to 5.5mm
Conditions: 1/4 Hard, 1/2 Hard, Full / Spring Hard
Finish: Bright, Matt, Soap Coated or Electro Polish Quality
Applications: Auto Motive Products, Wire Ropes, Spring, Cut Shot, Mig & Tig Welding, Braiding Hoses, Brushes, Chains, Kitchen Ware & Gadgets, Needles, Pins, Surgical Equipments. Scrubber Etc.
STAINLESS STEEL ROPE WIRE
We offer High Quality Stainless Steel Wire for various applications. Our wire have Smooth Surface, High Corrosion Resistant, High Fatigue Strenght, Excellent Heat Resistance and free from lateral / longitudinal cracks, pits & marks etc.
Grade: 302, 304, 310/S, 314 & 316
Diameter: 0.10mm to 5mm
Conditions: Hard
Finish: Bright or Matt Finish
Applications: Lifts, Cranes, Auto Cable, Inner & Outer
STAINLESS STEEL SPRING WIRE
Our Stainless Steel wire for steel springs are High Tensile Strength wires for Precision Springs, Compression Springs, Tension springs, pins etc.
Grade: 302, 304 & 316
Diameter: 0.10mm to 5mm
Conditions: 1/4 Hard, 1/2 Hard, Full Hard
Finish: Bright or Matt Finish
Applications: Hardwares, Electronics, Electricals, Auto Mobile, Oil Seal, Industrial Usages
MIG & TIG WELDING WIRE
Our stainless steel welding wires are suitable for stainless steel welding and cryogenic Applications, they have excellent flux adhesion and corrosion resistance.
Grade: 202, 304, 304L, ER304L, 307LSI, 308LER, 316L / ER316L & 430L Etc.
Diameter of Core Wire: Core Wire for Electrode in Coil form 1.60 MM to 5.0 MM
MIG Wire: On Spools from 0.80 MM to 1.60 MM
TIG Wire: In Cut Length 1.60 MM to 5.0 MM
MIG & TIG Finish: Bright or Cleaned
Core Wire Finish: Bright or Powder Coated
